Rigid Solar Panels

Solar Charge Controllers

Foldable Solar Panles

PV Combiner Boxes

Gel Batteries

Battery Cables

Battery Balancers

Battery Isolators

Battery Combiners

Low Voltage Disconnection

Power Cables

Fuses

Circuit Breakers

Connectors and Lugs

DC Distribution Boards

Low Voltage Disconnection

Battery Switches

Bus Bars

DC/DC Converters

Enclsoures

Circuit Breakers

See All

Fuses

Comms Cables

Victron Phoenix Inverter 24/2000 230V Smart PIN242200000

$1,022.25

$929.32 ex GST

Available More than 10 in stock

Product Info

Manufacturer: Victron Energy

SKU: PIN242200000

Shipping Weight: 14.6 kg

Phoenix Inverter Smart

https://www.victronenergy.com/upload/documents/Datasheet-Phoenix-Inverter-Smart-1600VA-3000VA-EN.pdf 9Specification Sheet)

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA for 12, 24 or 48V systems.

It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.

Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.

Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.

Bluetooth built-in: fully configurable with a tablet or smartphone

• Low battery voltage alarm

• Low battery voltage cut-off and restart levels

• Dynamic cut-off: load dependent cut-off level

• Output voltage: 210 - 245V

• Frequency: 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level

• Alarm relay

Monitoring:

• In- and output voltage, load and alarms

VE.Direct communication port

The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.

Remote on/off

A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

Models:

12 / 24 / 48 Volt

SKU:PIN242200000

Specification Sheet

Victron Energy is well known for its professional products for independent electric power management.

How much is shipping?

Shipping is calculated at checkout based on the contents of your cart and the shipping address. This takes into account product weight and dimensions, and whether the location being sent to is metro, regional or remote.

Where do you ship?

We ship to most destinations in Australia. If the checkout is not allowing your shipping address, please contact us and we will see what we can do to help.

Who do you ship with?

We use different couriers depending on rates and services available, including Toll IPEC, TNT, Allied Express, Australia Post and Fastway. If you have a specific reason to use or not use a particular courier please let us know.

How long does shipping take?

It varies greatly based on the destination and the products ordered. Orders are usually dispatched from our warehouse in Bayswater, VIC within 24 hours. You can use the estimates below as a rough guide for shipping time:

VIC and SA: 1-2 days
QLD and NSW: 2-3 days
NT, WA and TAS: 3-10 days +

These estimates do not apply if the destination is regional or remote. Once orders leave our warehouse we have very little control over the actual shipping time. If you need a more accurate estimate of shipping time please contact us.

Thanks for shopping at SBP Electrical. If you are not entirely satisfied with your purchase, we're here to help.

Returns

You have 30 calendar days to return an item from the date you received it.

To be eligible for a return:

Your item must be unused and in the same condition that you received it.
Your item must be in the original packaging.
Your item needs to have the receipt or proof of purchase.

Refunds

Once we receive your item:

We will inspect it and notify you that we have received your returned item.
We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment).
You will receive the credit within a certain amount of days, depending on your card issuer's policies.

Shipping

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable.

If you receive a refund, the cost of return shipping will be deducted from your refund.